OTHER MACHINES
$10,925.00
Comes with 2 buckets:
Rock bucket 280mm wide with 3 teeth
Dirt bucket 880mm
PTO Drive
Tractor HP Required: 30-50Hp
Rear Linkage: 3 Point Linkage
Rear Linkage Category: Category 1
Max Digging Depth: 1950mm
Max Swing Angle: 180deg
$11,500.00
Comes with 2 buckets:
Rock bucket 400mm wide with 4 teeth
Dirt bucket 900mm
PTO Drive
Tractor HP Required: 55-80Hp
Rear Linkage: 3 Point Linkage
Rear Linkage Category: Category 1 & 2
Max Digging Depth: 2550mm
Max Swing Angle: 180deg
$2,575.00
Working width 2000mm
Number of tines 22
Adjustable rear roller and drawbar for depth adjustment.
Able to be used on sand, synthetics and sand/rubber surfaces. This Arena Groomer can be towed behind Quads and ATV’s.
The drawbar is removable so you can use on the 3 point linkage of a tractor.
$7,500.00
Recommended HP: 30-00
Hydraulic: GPM 5-20
Rotor Size: 610mm
Cutting Wheel Speed: 810 RPM
Cutting Height: 457mm above ground
Cutting Depth: 203mm below ground
Maximum Cutting Depth: (per pass) 152mm
Maximum Horizontal Cut 660mm
Swing Arc: 65°
Hitch Category: Cat. I or II
$287.50
Replacement 3 point Linkage Frame for replacement of linkages on tractor mounted implements or to convert to Cat 2 Pins
Cat 2 Pin holes with lock and slide top hole
Pin holes to fit 25mm top link and 28mm bottom linkages
840mm between lower linkages
650mm between top and bottom linkages
Solid construction with 10mm steel on linkage points and 80x48x5mm box for main frame
$287.50
Replacement Skid steer Mounting Plate
Fully welded and ready to be used for making your own attachment or adapting an existing one
Width 1200mm
Height 460mm
10mm side and hook plate
6mm Back plate
$150.00
Euro hitch plate for adding or adapting tractor implements.
Hook Width 40mm
Hook Eye 42mm
Locking Ring Width 25mm
Locking Ring Hole 23mm
Backing Plate 10mm
$75.00
Euro hitch brackets for adding or adapting tractor implements.
Hook Width 35mm
Hook Eye 45mm
Locking Ring Width 24mm
Locking Ring Hole 30mm
Backing Plate 10mm
Unsure which machine is best for you? Get in touch - we’re here to help!
Back to top ↑